Fusing belts :
We have been offering 3 kind of fusing belts. There are as follows:
Teflon® seamless fusing belts made of high strength fiberglass or Kevlar® knitted by special equipment and coated with Teflon® resin in high temperature. Seamless belts conquer the problems of traditional fusing belts with joint such as bad stability, ruptures and deflecting for different girth on two sides at the joint and mainly it is without any joint that assures any marking of the joint on the fused or laminated garment or textiles. The seamless fusing belts have a smooth surface, excellent antistatic effect (black version), long life and advantages that other seam fusing belts do not have. We have been offering fusing belts provided by excellent release PTFE Teflon ® coated seamless fabrics , dimensional stability and high anti-tensile strength operating temperature range (from -60°C up to +260°C). It is impervious to virtually all chemical attack. Seamless fusing belts should be as standard equipment of fusing or laminating machines. If not do not hesitate and do not wait to replace seam belts by seamless fusing belts. If you try you will never want seam belts back anymore! There is possibility to supply seamless fusing belts black (antistatic) or white up to width 1 800 mm and up the length 7 000 mm.
This type of belts is made with a thinner material that winds twice around the entire circumference of the belt. The two layers of the belt are then laminated together over the entire surface of the belt. This process makes the belt extremely smooth and virtually seamless, greatly reducing belt tracking problems. We have been offering fusing belts provided by excellent release PTFE Teflon ® coated fabrics , dimensional stability and high anti-tensile strength operating temperature range (from -60°C up to +260°C), which is obviously for these kind of materials.
The most common of the fusing belts due to its low cost production. The fusing belts with seam can often be the most problematic area of machinery belts. To eliminate them as much as possible with we have been offering various wide of seam designs.
* "Scarfed" seam: The smoothest, strongest, most flexible seam available today. It resembles a 30 mm overlap seam but is much smoother and more flexible. There is no almost double thickness, as the mating surfaces are carefully ground to a taper and securely welded
* Overlap seam: This is the most popular seam because it is strong inexpensive and easiest to produce. The disadvantage of the overlap seam is that it is not very smooth and in some applications the seam may mark the material being fused. In addition, because the overlap seam is more than double the thickness of the rest of the belt it is slightly stiffer and suffers from early flex fatigue and very often breaks
* Angled seam: This seam is cut at a slight angle helping the belt to roll easily over the fusing machine rollers, reducing flex fatigue. The angle of the overlap can be varied, so that the splice does not run over the conveyor pulleys in one line. 45° and 70° are popular.
Custom and other types of splices are available upon request.
If you require some further information about products and delivery term, do not hesitate to check information mentioned on fusingbelts.com web pages or do not hesitate to contact us!
We would like to kindly welcome you to be a part of our satisfied customers.
Feel free to contacts us by phone, fax or e-mail mentioned below.
We are at your disposal to fulfill your requirements and demands about fusing belts or other related products.
T KONFEX, s.r.o.
911 05 TRENCIN
SLOVAKIA – EUROPE
Tel.: +421 32 6580 613
Fax.: +421 32 6401 224
skype phone & chat: TKONFEX